Playing a musical instrument requires practices and mastering different movements, positions, and many other factors. This is the only way to produce a high-quality musical sound. This is for all musical instruments, whether wind instrument, string instruments or membrane ones like drums. The violin is not excluded. This is a string instrument that can produce a very high quality rich, deep and very natural sound is the violinist knows how to hold a violin correctly. Not many people know how to hold it properly, but here are a few tips that can help you out.
The first step is to make sure that the instrument is sitting on the collarbone. It should also be centered so that the tailpiece goes into the neck. This often requires a chin rest that is able to go over the tailpiece. Secondly, the strings should be parallel to the ground, allowing the instrument to point up a little. Avoid touching the violin with the shoulder to it help reduce back pains and coordination problems.
When holding the instruments, there are things to look for. First position is achieved by having the thumb an inch from the nut. It should also be slightly bent, and touch the neck at the middle joint. In this position, an open space should be left between the index finger base and the lower half of the thumb. The space should be enough to fit a pencil and move it freely.
When playing the whole step above the nut, the thumb, and the first fingers are aligned. All other fingers are curved; with short nails that allow the fingers to strike the fingerboard on the tips. While doing this, the wrist must be in a straight position as inward bent can make the base of the thumb or the palm contact the neck hindering the hand movement.
Whenever playing the whole step above the nut, be sure to align the thumb and the first finger. Keep the nails should and have all the fingers curved. This allows the fingers to strike the fingerboard at the tips. The wrist, on the other hand, should be straight. This prevents the left portion of the palm from being in contact with the neck.
Keep the wrist straight as bending it inward make the thumb to or the palm to contact the neck. In addition to this, be sure to position the left arm under the back in such a way that it remains invisible when looking from the upper right side of the instrument. When in a standing position, keep the feet apart (shoulder width), align the neck and the fingerboard with the left foot.
The correct position of the scroll requires that it is held at the nose level or thereabout. This should be easy to achieve with a good shoulder pad. It also helps you relax the shoulder and lift most of the weight off of the left arm. Then look at the strings and play. Even when in a sitting position, these positions will be retained.
If you manage to hold the violin without a shoulder rest, you can achieve a better tune with very little practice. Sadly though, there are few people who know how to achieve this position, and even fewer people who are able to teach it. As should, you often have to learn it by yourself. Since it guarantees to enable you to play with less tension and make you confident within a short time, it worth trying out.
The first step is to make sure that the instrument is sitting on the collarbone. It should also be centered so that the tailpiece goes into the neck. This often requires a chin rest that is able to go over the tailpiece. Secondly, the strings should be parallel to the ground, allowing the instrument to point up a little. Avoid touching the violin with the shoulder to it help reduce back pains and coordination problems.
When holding the instruments, there are things to look for. First position is achieved by having the thumb an inch from the nut. It should also be slightly bent, and touch the neck at the middle joint. In this position, an open space should be left between the index finger base and the lower half of the thumb. The space should be enough to fit a pencil and move it freely.
When playing the whole step above the nut, the thumb, and the first fingers are aligned. All other fingers are curved; with short nails that allow the fingers to strike the fingerboard on the tips. While doing this, the wrist must be in a straight position as inward bent can make the base of the thumb or the palm contact the neck hindering the hand movement.
Whenever playing the whole step above the nut, be sure to align the thumb and the first finger. Keep the nails should and have all the fingers curved. This allows the fingers to strike the fingerboard at the tips. The wrist, on the other hand, should be straight. This prevents the left portion of the palm from being in contact with the neck.
Keep the wrist straight as bending it inward make the thumb to or the palm to contact the neck. In addition to this, be sure to position the left arm under the back in such a way that it remains invisible when looking from the upper right side of the instrument. When in a standing position, keep the feet apart (shoulder width), align the neck and the fingerboard with the left foot.
The correct position of the scroll requires that it is held at the nose level or thereabout. This should be easy to achieve with a good shoulder pad. It also helps you relax the shoulder and lift most of the weight off of the left arm. Then look at the strings and play. Even when in a sitting position, these positions will be retained.
If you manage to hold the violin without a shoulder rest, you can achieve a better tune with very little practice. Sadly though, there are few people who know how to achieve this position, and even fewer people who are able to teach it. As should, you often have to learn it by yourself. Since it guarantees to enable you to play with less tension and make you confident within a short time, it worth trying out.
About the Author:
Get step-by-step tips on how to hold a violin correctly by watching the online videos. Simply refer to this guide now at http://www.designs4harmony.com.
No comments:
Post a Comment