Age catches up with everything and everyone at some point. Unfortunately, no amount of surgery can make up good as new again. Our favorite books, however, have the chance of becoming good as new again. You can do this yourself, or you might take it to a book restoration store. For those who would love to do it themselves, the process of book restoration new jersey is quite simple.
The first thing is you need to grab the manuscript and align all the pages are they are supposed to appear. This may take a while especially if the pages are old and dog-eared. At a book restoration store, the professionals use a special jig to help the aligning process move along faster. You can use a smooth piece of wood to straighten them out.
After you are done aligning the pages, place a wood slat on the first page and on the last page. This will help in holding the spine in place. The wood slats really come in handy during the drilling process. This is because you drill through them instead of directly on the paper. Drilling directly may cause the pages to appear puffy, and the holes may not be the required size.
After putting the slats in position, you should hold the volume in place using clamps. Make sure that the size of the clamp is proportional to the size of the book. The smallest thickness the clamp can hold may be a lot bigger than the thickness of the manuscript. Medium size clamps help to make the drilling process a lot easier. This is because the book is held in position.
Drilling is a very dangerous process. If you allow the drill to go through the spine of the book and on to the other slat clamp, you may end up drilling your fingers depending on the speed of the drill. To avoid this, you should not allow the drill to go all the way through the second wood slat. You may always find another method to allow the hole to be complete.
A drill press is more preferable compared to a hand help motor. Since you cannot drill all the way to the other side, you ought to drill a hole and skip some space. When you are done, on the other side, you must drill on the spaces which you skipped. As you move the clamp, ensure you do not move any papers to maintain alignment.
The sewing process requires a lot of concentration. You have to use very strong thread because the spine of the volume will be coming together. You will also need to move the clamps, but you should really be careful not to disarrange the pages and have all the hard work you put in to go down the drain.
For the cover, you can use the old cover but use new fabric on it. You get to choose the color you would like. This brings out your own unique taste. You can also use gold spray on the edge of the pages for the finishing.
The first thing is you need to grab the manuscript and align all the pages are they are supposed to appear. This may take a while especially if the pages are old and dog-eared. At a book restoration store, the professionals use a special jig to help the aligning process move along faster. You can use a smooth piece of wood to straighten them out.
After you are done aligning the pages, place a wood slat on the first page and on the last page. This will help in holding the spine in place. The wood slats really come in handy during the drilling process. This is because you drill through them instead of directly on the paper. Drilling directly may cause the pages to appear puffy, and the holes may not be the required size.
After putting the slats in position, you should hold the volume in place using clamps. Make sure that the size of the clamp is proportional to the size of the book. The smallest thickness the clamp can hold may be a lot bigger than the thickness of the manuscript. Medium size clamps help to make the drilling process a lot easier. This is because the book is held in position.
Drilling is a very dangerous process. If you allow the drill to go through the spine of the book and on to the other slat clamp, you may end up drilling your fingers depending on the speed of the drill. To avoid this, you should not allow the drill to go all the way through the second wood slat. You may always find another method to allow the hole to be complete.
A drill press is more preferable compared to a hand help motor. Since you cannot drill all the way to the other side, you ought to drill a hole and skip some space. When you are done, on the other side, you must drill on the spaces which you skipped. As you move the clamp, ensure you do not move any papers to maintain alignment.
The sewing process requires a lot of concentration. You have to use very strong thread because the spine of the volume will be coming together. You will also need to move the clamps, but you should really be careful not to disarrange the pages and have all the hard work you put in to go down the drain.
For the cover, you can use the old cover but use new fabric on it. You get to choose the color you would like. This brings out your own unique taste. You can also use gold spray on the edge of the pages for the finishing.
About the Author:
You can find a list of the advantages you get when you use book restoration New Jersey services at http://www.bythecpress.com right now.
No comments:
Post a Comment